Smeg Westinghouse Daewoo DW2042FR-09 Genuine Water Filter WHE7670SA 3019986700

Description

Genuine Smeg Westinghouse Daewoo Water Filter

Suitable for

Daewoo, LG, Smeg, Miele and Westinghouse refrigerators.

The DW2042FR-09 water filter replaces

DW2042F-09, DW2042FR-09, DW2042FR09, FRNY225D2V, FRNY22D2W, FRNY22F2VI,

DW2042FB, SR620X, Titan4, Titan 4, 3019986700. The filter also suits the Westinghouse WHE7670SA.

About the Aqua Crystal DW2042FR-09 fridge filter

The filter is mounted on the ceiling inside the fridge. This fridge water filter is the original

water filter for Daewoo refrigerators and is designed to improve the taste of your water.

Kept in optimal working order, it yields bottled water quality on tap at just a fraction of the cost.

The DW2042FR-09 Daewoo water filter reduces the following health related contaminants

97.60% of Chlorine Taste and Odour

99.90% of Particulate (Class III)

Tested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of

Chlorine Taste and Odour. As with all built-in refrigerator water filters, the Daewoo

DW2042FR-09 Aqua Crystal does not remove Fluoride.

Filter life

Nearly ever refrigerator manufacturer recommends that fridge filters be replaced every 6

months or when the “change filter” light comes on. However, keep in mind that unused fridge

filters have an endless shelf life, so buying in bulk to save money makes cents!

Technical specifications

• Flow Rate: 1.9 lpm
• Operating Temperature: min 1°C / max 38°C
• Operating Pressure: min 207 kPa (30 psi) / max 827 kPa (120 psi)
• Function: Chemical and Mechanical Reduction
• Capacity: 1,136 litres
• Dimensions: approximately 2.5 cm x 12 cm

Installation instructions

• Shut off water supply.
• Rotate the old cartridge counter clockwise 1/4 turn and pull it out.
• Remove white cap from the new water filter.
• Insert the new filter into the filter head and twist the filter clockwise 1/4 turn.
• Turn on the water supply and check for leaks.
• Flush filter for 5 minutes before use to purge the system.
• Reset the “Filter Indicator” light by pressing the Ice Maker Lock button
  for 3 seconds or more. While holding the lock button,
  the light will change to green.
• Important: It is essential that operation, maintenance and filter replacement
  be carried out in accordance with the manufacturer’s recommended procedures
  and guidelines for this product to perform as advertised.
  Failure to do so may void warranty.